17-A Street, Al Quoz 3, Dubai

+971 4 323 7106


Sun-Sat: 7:30 am – 6:00

Cayenne roof liner repair Dubai

Cayenne roof liner repair Dubai

GT Auto Center is the best option for Cayenne 

Smart Cayenne Roof Liner Repair Deals

From an aesthetic standpoint, the inside upholstery of the Cayenne is one of the most essential components, but it is also one of the most fragile and susceptible to wear. Unfortunately, stains, loss of color vibrancy, and rips are entirely typical during the first few years, particularly in the car’s roof, which tends to loosen in the corners and around the edges.

Obviously, certain factors influence the wear of the top portion of the inside lining, such as smoking inside the vehicle, keeping the car in the sun for extended periods of time, or improper car interior cleaning. Choosing the Cayenne roof liner repair Dubai services is the best option.

How do you fix a car’s roof covering?

Suppose the vehicle’s roof lining becomes loose, damaged, or discolored over time or as a result of too vigorous cleaning of the passenger compartment. In that case, the only option is to have it repaired at a specialist upholstery workshop. Although it is possible to perform the job yourself, due to the technical complexity of the process, it is recommended that you call experts that use only Cayenne hygiene solutions. Now that GT Auto Center is the best option for Cayenne, you can get all the options there.

The Fixings Needed

Depending on the degree of the damage, it may be feasible to repair the roof of the Cayenne without dismantling the whole upholstery by applying special upholstery adhesive to the inside borders of the cloth and potentially installing stops. For a trained specialist, this is a very easy procedure, the cost of which is determined by the coating material and the work hours needed for the repair.

Alternatively, disassembling the whole interior portion of the roof and removing the top to conduct work in a skillful way may be necessary. In this scenario, all coverings that are no longer adhering to the structure must be removed, the foam rubber must be removed with a special sponge, all residues must be removed with an air compressor similar to those used in professional sanitizing, and the corners and cracks must be thoroughly cleaned.

Use of the Brush

Then, using a brush, apply the high-temperature glue to the whole support surface, spreading it evenly. Depending on the draught you want to get, certain goods must be diluted 10% with acetone or comparable chemicals. It’s essential to go 30-40 cm at a time, especially in the heat, to avoid the glue drying up before the cloth adheres appropriately. To improve the grip, a little amount of glue should be applied to the covering as well, being careful not to let it soak and penetrate too deeply since this may stain the fabric.


Simply flip the structure over, attach the extra fabric to the back, and let it sit for a few hours before putting it in the car. Unfortunately, it is not always feasible to restore the inside lining; in certain cases, particularly when it is discolored and severely damaged, the car’s roof must be replaced. This procedure is somewhat more costly than a basic repair since you must purchase new fabric and allow more time for work, but the end effect is much superior.


Unfortunately, the friction of your brakes causes your brake pads to wear down over time, and they will need to be replaced time and time again.

Leave a Comment

You must be logged in to post a comment.



April 2024
Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.