There will always be a sloppy person parking, an out-of-place football, a grocery cart, a fallen tree, or something else that will leave its imprint on the vehicle, no matter how gracefully and gently you drive it. While vintage cars can pull off this appearance fairly well, we and our everyday vehicles are unable to do so. Nobody wants dents and scrapes on their new car, especially if they just bought it.
From going to work/school to arranging a road vacation, a gleaming, well-maintained car makes a significant difference in our life. While annual MOTs and frequent check-ups are required, there are a few things you can do at home with readily available household items and patience. Of course, the size and type of dent matter when it comes to repairing it at home, but it’s worth a go.
METHODS TO FIX CAR DENT REPAIRS
Plunger Method
It’s not simply a bathroom gadget; it may also be quite useful for sucking out the dent. And no, we’re not trying to unclog anything here; instead, we’re using its suction power to the best possible advantage. The plunger should be of the cup type (like those used in sinks) rather than the flange kind (used for toilets).
The concept is to loosen the metal with hot/boiling water, then use the plunger to remove the dent out with a slight pull and strength. Larger dents won’t be able to pop back with simply a plunger, therefore this method is best for small to medium-sized dents. Remember not to be too pushy, and occasionally more than one or two pushes are required to achieve the desired result.
Method Using Hot Water
When it comes to car damage repair, heat is the most effective method. And before you get out your toolboxes and heavy appliances to accomplish the job, try applying heat to the region to see if it will return to its previous shape. Of course, when the dent isn’t spread out across a big area, this method works better.
Try working with boiling water to see if the dent will come out completely. It may appear to be too wonderful to be true, but there are several testimonials and proof to back it up. Keep in mind, however, that the boiling water procedure is only effective with plastic bumpers. After it has returned to its original shape, it is recommended that you sprinkle it with cold water to allow it to sit and cool down.
Compressed air and a hairdryer
Using a combination of hot and cold air is the ultimate DIY method.
We utilize a Hair Dryer and compressed air to make it as simple as possible. The heat causes the plastic to expand, allowing the dent to take on any shape, whereas the compressed cold air causes the plastic to contract, causing the dent to pop out.
To do so, simply begin by heating the dented area with a hairdryer set to the highest setting. This will aid in the expansion of the car’s plastic. Once you’ve determined that it’s hot enough, use the compressed air can spray the hot region. Make sure the can is turned the wrong way up. The plastic will compress as a result of the cold air, allowing the dent to come out.
The Dry Ice Method
The dry ice approach, while not technically a household item, can be useful for removing small dents from an automobile. Make sure you’re wearing gloves that protect your hands! The procedure is straightforward. Simply place the dry ice on the dent and rub it around until you hear the dent return to its original position.
You can use the dry ice as many times as necessary to achieve the desired result. To get a faster outcome, heat the dent with boiling water or a hairdryer first.
The car dent repair blog comes to a close now. I hope you find this article to be useful and instructive. Keep an eye on this space for more articles like this. GT Auto Center is also a good place to go if you need a low-cost car repair.
Address: 17-A Street, Al Quoz, Dubai, United Arab Emirates
Contact: +971 4 323 7106
To know more about the services here and for other information click on the link below
